Baumatic B27SS Uživatelský manuál stáhnout pdf (Strana 15)

Residual heat indicator

o After a zone is switched off, the corresponding

cooking zone indicator (6) will show the letter “H”,

alternating with “0”. This means that the

temperature of the zone is over 60°C and is

therefore high enough to cause injury.

o If you switch off the appliance using the ON/OFF button (1) then

only the “H” will appear in the cooking zone indicator (6).

o When the temperature falls below 60°C, then the letter “H” and

“0” will stop alternating (if the hob is still switched on), or the

“H” will go out (if the hob is not switched on).

o IMPORTANT: The residual heat indicator will disappear if your

mains supply is cut.

Locking the hob top

o The whole hob top can be

locked by pressing the safety

lock button (2) whilst the

appliance is switched on.

o The safety lock neon (3) will

light to show that the safety

lock feature has been

switched on.

o When the safety lock feature is activated, it will disable any of

the other buttons on the control panel, except the ON/OFF

button (1).

o To disable the safety lock feature, you should press the safety

lock button (2) again. The safety lock neon (3) will go out and

you are then able to adjust the power of any zone on the hob

top.

o IMPORTANT: If the appliance is switched off whilst the safety

lock feature is activated, then it will still be activated the next

time that you switch the appliance on. Therefore before you can

switch on a zone and set a power level, you will need to

deactivate the safety lock by pressing the safety lock button (2).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Žádné komentáře

Baumatic B27SS Uživatelský manuál Strana 15