Baumatic BF13.3R Uživatelský manuál

1 BF13.3 / BF13.3R 60cm touch control ceramic hob

Control panel layout 1) ON / OFF button 2) Cooking zone display 3) Plus button 4) Minus button Using the ceramic hob Before first use

Switching on a zone and setting a power level IMPORTANT: A zone must be selected within 2 minutes of switching the hob on. o Press the plus button

12then the IMPORTANT: The residual heat indicator will disappear if the o IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB ocking the hob top o IM

13utomatic switch-off function o Based on the power level, each cooking zone is shut off after a o The appliance can be switched off at any time by

148 270 9 10 ooking guide o For cooking suggestions for the different power levels please see Touch control Power level Cooking suggestions C the t

o The best thickness for the bottom of the pans is 2 – 3 mm for enamelled steel and 4 – 6 mm for stainless steel with sandwich type bottoms. o If t

You may find it easier to clean some deposits whilst the hob surface is still warm. However you should take care not to burn yourself if cleaning the

o The ceramic surface should be wiped with a damp cloth that has been placed in warm water mixed with a small amount of washing up liquid. o Dry th

o 55 mm clearance between the back of the hob surface and the wall behind it. o If the hob is positioned so that the right or left hand side of the

oven manufacturer’s instructions, ensuring that sufficient aeration is provided. o The heat produced by the oven, measured on the right side of the

User Manual for your Baumatic BF13.3 / BF13.3R 60 cm Front touch control 4 zone ceramic hob 2 NOTE: This User Instruction Manual co

o Do not leave a gap in the sealing agent or overlap the thickness. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the ape

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. o The cable can be looped if necessary, but

23* The safety cut out has been triggered. Press the ON/OFF button to reset the hob. * Check that the mains electrical supply to the appliance is

card U400 Secondary voltage of the power unit too high (primary>300V). Control unit cuts off and a permanent acoustic signal is heard. Control uni

25 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sale

26

27

28 28

3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 10 Dimensions 8 Electrical details

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard

Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before atte

6Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch

Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be disc

o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also t

Electrical details Rated Voltage: 220 - 240 Vac 50 – 60 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max