Baumatic BDW46 Uživatelský manuál

iel BDW46 45 cm Fully integrated full height electronic dishwasher

Control panel 1) Program indicator neons 2) Program selection button 3) Rinse aid and salt indicator neons 4) LED display 5) Delay start button

Filling with dishwasher salt IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is us

o IMPORTANT: You do not need to pour 1 litre of water into the container when you subsequently fill the water softener with salt. Setting the water

Filling with rinse aid The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These dro

o You should continue to adjust the rinse aid level upwards until you get no water spots. o If you get cloudiness or streaking on your dishes, the

Loading the upper basket The upper basket is most suited to washing delicate and light dishware, such as glasses, coffee & tea cups, saucers, pla

Lower position o If the upper wheels are placed in the guide supports, then the basket is in the lower position. o For accommodating additiona

IMPORTANT: Care should be taken to make sure that the spray arms can move freely when items have been loaded into the baskets. Loading the lower bask

The cutlery basket Cutlery should be placed inside of the cutlery basket. The cutlery basket should then be placed in the appropriate position in the

o Do not allow glasses to touch inside the dishwasher, otherwise damage may occur. o Small objects can be placed inside of the cutlery basket.

USER MANUAL FOR YOUR BAUMATIC BDW46 45 cm Fully integrated full height electronic dishwasher NOTE: This User Instruction Man

Program table Program Cycle Program information Description of cycle Detergent pre/main Wash Times* Normal ** For normally soiled loads, such as po

21 etting a wash program ake sure that the before first use section has been Check whether the appliance needs rinse aid or salt adding to it. o Pu

22 o Press and hold down the program selection button for 3 seconds to cancel the wash program. Then use the program selection button to choose the

o Press the delay start button and you will see the amount of time that you are delaying the wash program by, appear in the LED display. o Close the

Main filter- Food and soil particles are trapped by this filter and pulverised by a special jet on the lower spray arm. This debris is then washed do

5. Place the main and coarse filter back into their original positions in the base of the dishwasher. You must turn the coarse filter clockwise to lo

o Wipe over the control panel using a brand new damp cloth with warm water. Cleaning the door o To clean the edge around the outside of the

27 E3 o Longer heating time- not reaching the required temperature. 9 Malfunction of the temperature sensor or heating element. 9 Call the Baumati

IMPORTANT: If any other fault code appears in the display window, you should not attempt to clear it yourself and contact the Customer Care Departmen

29 Utensils are not secure in the baskets or something small has dropped into the basket Motor hums Ensure that everything is loaded as per Bauma

3 Contents Environmental note 4 Important safety information 5 – 7 Specifications 8 - 9 Description of the appliance 9 -

Dishwasher leaks The rinse aid dispenser is overfilled or rinse aid has been spilt inside the appliance Dishwasher isn’t level Take care not to over

31 The aperture that your dishwasher needs to be installed into o There should be less than a 5 mm gap between the top of the nstallation stages 1

o The maximum weight of the furniture door should be 5.5 o Use the installation template supplied with the appliance to mark o Attach the s o Atta

33 the door spring o The door of the dishwasher is o After the furniture door has been fitted, you will need to adjust o Using an Allen key, rot

34 onnecting to the mains water supply IMPORTANT: Do not connect the appliance to your mains O NOT CONNECT THE WATER INLET HOSE TO A HOT The inlet

35 onnecting to the water outlet 9 Place the end of the drain hose on your drain pipe. Push it a IMPORTANT: Do not insert the drain hose too de

9 Consult the rating plate, located on the right hand side of the drop down door BEFORE making the electrical connections. Ensure that the

o The condensation strip will be located inside of your dishwasher. o Ensure that the underneath of the worktop is clean before sticking the strip

Levelling the appliance o IMPORTANT: Your dishwasher must be level for it to operate properly. o Make sure that the dishwasher is supported whils

39 Securing the dishwasher o The dishwasher must be secured to the worktop, this can be done in one of two ways:- o Standard worktop- Secure the

ENVIRONMENTAL NOTE Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useles

My appliance isn’t working correctly IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your main

41 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales

42

43

44 44

IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before atte

6 o Care should be taken not to trap the power supply cable underneath the appliance whilst installing it. o No attempt should be made to alter or

7 Child Safety o Your dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should n

8 Specifications Product dimensions Height: 820 - 850 mm Width: 445 mm Depth: 560 mm Aperture dimensions Height: 820 mm (min) Width: 450 mm Dep

Electrical details Rated voltage: 230 Vac 50 Hz Supply connection: 13 A (double pole switched fused outlet with 3 mm contact gap) Optional